Product overview of 1-292215-9 AMP Mini CT connector assembly
The TE Connectivity AMP Connectors 1-292215-9 is a connector assembly in the AMP Mini CT series, defined as a plug to plug relay header for wire-to-panel systems. It provides 19 positions arranged in a single row with a 1.5 mm [0.059 in] centerline (pitch). The connector is designed for signal applications and panel mounting, supplied in a white housing with male pins on both mating interfaces.
Within TE Connectivity’s portfolio, 1-292215-9 AMP Mini CT is categorized under PCB Connectors → Wire-to-Board Connectors → Wire-to-Board Connector Assemblies & Housings. The structure and designation “plug to plug relay header” indicate that it functions as an intermediate or adapter connection element between two plug-style interfaces, allowing signal routing between wire-harnessed circuits and a panel-mounted interface in a compact 1.5 mm pitch format.
Mechanical and electrical interface design of 1-292215-9 AMP Mini CT
The 1-292215-9 AMP Mini CT connector assembly is defined around a few key mechanical parameters:
- Number of positions: 19
- Row configuration: 1 row
- Centerline (pitch): 1.5 mm [0.059 in]
- Contact type: Plug, male pins to plug, male pins
- Mounting style: Panel mount
- Housing color: White
- Signal category: Signal connector
The single-row, 1.5 mm centerline geometry of the 1-292215-9 AMP Mini CT enables high-density signal routing while maintaining mechanical robustness appropriate for wire‑to‑panel designs. The narrower pitch compared with 2.54 mm or 2.0 mm systems allows more signals within a given panel width or frees panel space for additional functions.
The plug to plug relay header architecture means that 1-292215-9 AMP Mini CT presents male pins at both ends of the connector assembly. In practice, each side can mate with compatible AMP Mini CT receptacle assemblies or housings, simplifying the creation of a relay or adapter between two cable or board-mounted systems. The male-pin interface is optimized for signal-level usage, as explicitly noted in the description.
Panel mounting of 1-292215-9 AMP Mini CT supports direct integration into metal or plastic front panels, sub-panels, or chassis cutouts. This configuration is frequently used to bring internal board- or cable-based signals out to a user-accessible interface, or to route signals between separated compartments of an enclosure, while maintaining a consistent Mini CT interconnect standard.
Wire-to-panel implementation concepts using 1-292215-9 AMP Mini CT
As a wire-to-panel connector system, 1-292215-9 AMP Mini CT enables structured signal handoffs between harnesses and fixed panel locations. A typical implementation using 1-292215-9 AMP Mini CT proceeds as follows:
- A harness terminated with AMP Mini CT receptacle assemblies (for example, a 19-position Mini CT mating receptacle) is routed from a PCB or internal subsystem to the panel.
- The 1-292215-9 AMP Mini CT panel-mounted relay header is fixed into the panel cutout or bracket.
- The harness receptacle mates with one side of 1-292215-9 AMP Mini CT, forming a secure interconnect at the panel interface.
- The opposite side of 1-292215-9 AMP Mini CT, also with male pins, can mate to another harness or board-mounted receptacle on the other side of the panel, establishing continuity across the barrier.
In this role, 1-292215-9 AMP Mini CT acts as a mechanical and electrical relay between two Mini CT cable or board interfaces. The 19-position capacity allows grouping of related signal lines into a single standardized interconnect. For example:
- A 19-signal digital I/O group in a control unit can be routed through a single 1-292215-9 AMP Mini CT interface to an external module via a panel.
- A sensor backplane with multiple low-level signal lines can be consolidated onto a 19-position Mini CT harness, then brought to the panel through the 1-292215-9 AMP Mini CT relay header.
Because 1-292215-9 AMP Mini CT is part of the Wire-to-Board Connectors ecosystem, it can be combined with panel-side headers, cable assemblies, and receptacle housings to create complete signal chains without introducing multiple incompatible connector families.
Intermateability and system expansion with 1-292215-9 AMP Mini CT compatible parts
The 1-292215-9 AMP Mini CT connector is explicitly part of the AMP Mini CT series, for which TE Connectivity provides a range of compatible parts that allow system expansion and variant configurations. The documentation lists several compatible components and related items:
- TE Part # 1-353293-9 – MINI CT MT REC ASSY 19P GRAY
- TE Part # 6-353293-9 – MINI CT MT REC ASSY 19P BLUR (blue)
- TE Part # CAT-AM7053-C7671 – Mini Common Termination Contacts
- TE Part # CAT-AM7053-H8172 – Mini Common Termination (CT) Housings
For 1-292215-9 AMP Mini CT, mating with a 19-position Mini CT receptacle assembly such as 1-353293-9 or 6-353293-9 provides a complete plug‑receptacle interface. The color variants (gray, blue, etc.) can be used to visually distinguish different signal groups or functional harnesses while staying within the same AMP Mini CT mechanical standard.
The Mini Common Termination contacts and housings (CAT-AM7053-C7671 and CAT-AM7053-H8172) define the contact system that mates with 1-292215-9 AMP Mini CT’s male pins. By using these CT contacts and housings in harness design, multiple harness variants can be created for different products or configurations while still connecting to the same 1-292215-9 AMP Mini CT panel interface.
The documentation also shows related AMP Mini CT relay headers and receptacles with different position counts and configurations, for example:
- TE Part # 292215-7 – MINI CT SGL RELAY 7P NAT
- TE Part # 292215-8 – MINI CT SGL RELAY 8P NAT
- TE Part # 3-292215-2 – MINI CT SGL RELAY 12P BLACK
- TE Part # 1-292215-5 – MINI CT SGL RELAY 15P NAT
- TE Part # 4-353293-0 – 1.5MM CT MT REC ASSY 20P BLACK
- TE Part # 3-353293-8 – 1.5MM CT MT REC ASSY 18P BLACK
- TE Part # 2-353293-2 – 1.5MM CT MT REC ASS'Y 2P BLACK
- TE Part # 292254-2 – CT RELAY HDR ASSY 2P NAT
- TE Part # 292254-4 – CT RELAY HDR ASSY 4P NAT
- TE Part # 8-292155-6 – SGL HDR PANEL MOUNT ASSY
These parts demonstrate how 1-292215-9 AMP Mini CT fits into a broader matrix of position counts and formats. Where 1-292215-9 AMP Mini CT is chosen for 19-position signal groups, adjacent designs may use 7, 8, 12, 15, 18, 20 or lower pin-count Mini CT components in the same system. This allows scalable architectures where a common 1.5 mm CT interface standard is applied across multiple modules and panel interfaces.
Regulatory and environmental compliance characteristics of 1-292215-9 AMP Mini CT
The 1-292215-9 AMP Mini CT connector assembly is associated with TE Connectivity product compliance statements that cover major environmental and materials regulations. According to the documentation, TE identifies compliant part numbers based on concentrations of restricted substances and regulatory thresholds:
- EU RoHS (Directive 2011/65/EU, RoHS2)
- Maximum 0.1% by weight in homogeneous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP
- Maximum 0.01% for cadmium
- Or qualification via applicable exemptions in the directive annexes
- Finished electrical and electronic equipment will be CE marked where required (components themselves may not carry CE marking).
- EU ELV (Directive 2000/53/EC)
- Maximum 0.1% by weight in homogeneous materials for lead, hexavalent chromium, mercury
- Maximum 0.01% for cadmium
- Or qualification via directive exemptions.
- REACH Regulation
- Information on Substances of Very High Concern (SVHC) in articles for 1-292215-9 AMP Mini CT is based on the European Chemicals Agency (ECHA) “Guidance on requirements for substances in articles.”
For 1-292215-9 AMP Mini CT, these compliance notes indicate alignment with common environmental requirements applied in global electronics markets. When integrated into assemblies or equipment that must conform to RoHS, ELV, or REACH-related requirements, 1-292215-9 AMP Mini CT can be evaluated using TE’s compliance documentation available on the product page at TE.com.
Application-oriented design examples for 1-292215-9 AMP Mini CT in signal routing
The specification for 1-292215-9 AMP Mini CT describes it as a signal, panel mount, plug to plug relay header with a 1.5 mm pitch AMP Mini CT format. This allows a number of practical application patterns.
Example 1 – Control panel interconnect
In a compact control panel where a PCB holds microcontroller and I/O circuitry, signal lines for switches, indicators, and remote I/O can be consolidated into a 19-position Mini CT harness. The harness terminates into a 19-position Mini CT receptacle assembly using CT contacts and housings. The receptacle then mates to the 1-292215-9 AMP Mini CT, which is panel mounted. On the external side of the panel, another Mini CT harness mates to the opposite male pins of 1-292215-9 AMP Mini CT, routing signals to a secondary control box or remote display. The uniform 1.5 mm Mini CT interface standard simplifies both internal and external wiring.
Example 2 – Signal fan-in/fan-out in instrumentation
In a measurement or data acquisition instrument, multiple low-level signal channels (e.g., 16 channels plus reference and ground) can be grouped into one 19-position Mini CT interface. The 1-292215-9 AMP Mini CT is fixed on the front or rear panel, serving as the main signal gateway. Internal wiring uses CT receptacles and contacts to route channels to the acquisition board. External harnesses or adaptor boards can be created for different sensor configurations while always interfacing via the same 19-pin Mini CT relay header.
Example 3 – Modular equipment with series-wide Mini CT standard
For a product family with several variants, a standard 19-position 1-292215-9 AMP Mini CT interface can be defined as the “signal backplane connector” at the panel. Products with different channel counts can simply leave some positions unused, or pair the 1-292215-9 AMP Mini CT with different mating Mini CT receptacle assemblies (e.g., color-coded) to designate variant wiring maps. This approach leverages the Mini CT ecosystem: higher-pin-count receptacle assemblies like 4-353293-0 (20P) or 3-353293-8 (18P) can be used in parallel designs, all using the same 1.5 mm CT geometry.
Selection and comparison guidelines within the AMP Mini CT family for 1-292215-9
Within the AMP Mini CT series, the 1-292215-9 AMP Mini CT connector assembly is distinguished by its specific combination of attributes:
- Function: Connector Assembly, Plug to Plug Relay Header
- System: Wire-to-Panel, Wire-to-Board Connectors
- Positions: 19
- Pitch: 1.5 mm
- Row configuration: Single row
- Signal type: Signal
- Mounting: Panel mount
- Housing color: White
When choosing 1-292215-9 AMP Mini CT within a Mini CT-based design, the following comparative considerations arise:
- Position count versus alternatives
For harnesses or PCB interfaces requiring fewer contacts, other relay headers in the same 292215 family (e.g., 7P, 8P, 12P, 15P Mini CT relay headers) may be selected. 1-292215-9 AMP Mini CT is suited to cases where up to 19 signal lines are needed in a single connector, which can cover grouped I/O, multi-channel signals, or combined power and signal (provided power levels remain compatible with the Mini CT signal rating).
- Mating part alignment
The presence of compatible 19-position Mini CT receptacle assemblies (1-353293-9, 6-353293-9) makes 1-292215-9 AMP Mini CT a straightforward choice when a symmetrical 19-position plug–receptacle system is desired. Using the same pitch and series across both sides of the panel accelerates harness standardization and reduces connector diversity.
- Color and identification schemes
1-292215-9 AMP Mini CT is specified as white. Compatible receptacles can be gray, blue, black, or other colors, enabling color-coded harnessing. For example, 1-292215-9 AMP Mini CT on the panel can mate with gray 1-353293-9 for one signal group and blue 6-353293-9 for another product variant, allowing quick visual verification while retaining common mechanical design.
- System-level consistency
Since 1-292215-9 AMP Mini CT belongs to the same AMP Mini CT ecosystem as multiple headers, receptacles, and relay assemblies, using it as a standard panel interface can simplify logistics and documentation. Procurement can consolidate around a limited set of Mini CT part numbers, while design maintains a consistent 1.5 mm interface standard.
Conclusion for 1-292215-9 AMP Mini CT plug-to-plug relay header
The TE Connectivity 1-292215-9 AMP Mini CT connector assembly defines a compact, panel-mount, plug to plug relay header solution for 19-position, 1.5 mm pitch signal interconnects within the AMP Mini CT ecosystem. Its single-row male-pin architecture and wire-to-panel system classification make it suitable as a standardized signal gateway between internal harnesses or boards and panel interfaces.
By aligning with compatible AMP Mini CT receptacle assemblies, Mini Common Termination contacts and housings, and other Mini CT relay headers and receptacles in various position counts, 1-292215-9 AMP Mini CT supports scalable designs that share a common interface geometry. The associated environmental compliance framework covering RoHS, ELV, and REACH considerations provides a regulatory foundation for integration into modern electronic assemblies and equipment.
Frequently Asked Questions (FAQ)
- Q1. What type of connector is the 1-292215-9 AMP Mini CT?
-
- A1. The 1-292215-9 AMP Mini CT is a connector assembly described as a plug to plug relay header. It belongs to the AMP Mini CT series and is classified as a Wire-to-Board Connector Assembly within the broader PCB Connectors family. Its connector system is wire-to-panel, and it is designed primarily for signal applications.
- Q2. How many positions does the 1-292215-9 AMP Mini CT provide, and what is the pitch?
-
- A2. The 1-292215-9 AMP Mini CT provides 19 positions arranged in a single row. The centerline (pitch) between adjacent contacts is 1.5 mm [0.059 in]. This 1.5 mm pitch is characteristic of the Mini CT system and enables relatively high signal density compared with larger-pitch connector families.
- Q3. What is the contact and housing configuration of the 1-292215-9 AMP Mini CT?
-
- A3. The 1-292215-9 AMP Mini CT is a plug-to-plug configuration with male pins on both mating sides. It is a relay header that supports panel mounting, and the housing is specified as white. The single-row layout simplifies routing and alignment in panel and harness designs.
- Q4. Is the 1-292215-9 AMP Mini CT intended for power or signal use?
-
- A4. The 1-292215-9 AMP Mini CT is explicitly described as a signal connector. This means it is designed around the requirements of signal-level circuits rather than serving as a high-current power connector. It is suitable for routing digital or analog signal lines in wire‑to‑panel applications within the AMP Mini CT system.
- Q5. How is the 1-292215-9 AMP Mini CT typically mounted in a system?
-
- A5. The 1-292215-9 AMP Mini CT is a panel mount connector assembly. It is installed in a panel cutout or bracket so that one set of male pins is accessible on one side of the panel and the opposite set on the other side. Compatible Mini CT receptacle assemblies on harnesses or boards then mate with each side to relay signals across the panel.
- Q6. Which mating receptacles are compatible with the 1-292215-9 AMP Mini CT 19-position interface?
-
- A6. The documentation lists several Mini CT receptacle assemblies as compatible with the 1-292215-9 AMP Mini CT series, including:
- TE Part # 1-353293-9 – MINI CT MT REC ASSY 19P GRAY
- TE Part # 6-353293-9 – MINI CT MT REC ASSY 19P BLUR (blue)
These 19-position Mini CT receptacles can be used on harnesses or boards to mate with the male pins of 1-292215-9 AMP Mini CT. - Q7. What other AMP Mini CT series parts are related to 1-292215-9 AMP Mini CT for different position counts?
-
- A7. Within the same AMP Mini CT ecosystem, several related part numbers are indicated, including:
- 292215-7 – MINI CT SGL RELAY 7P NAT
- 292215-8 – MINI CT SGL RELAY 8P NAT
- 3-292215-2 – MINI CT SGL RELAY 12P BLACK
- 1-292215-5 – MINI CT SGL RELAY 15P NAT
Along with receptacle assemblies such as 4-353293-0 (20P), 3-353293-8 (18P), and 2-353293-2 (2P). These parts allow designers to apply the same Mini CT 1.5 mm pitch technology across multiple pin-count configurations in addition to the 19-position 1-292215-9 AMP Mini CT. - Q8. What contact and housing system mates with 1-292215-9 AMP Mini CT in wire harnesses?
-
- A8. The Mini Common Termination (CT) system is used with AMP Mini CT connectors. The documentation references:
- CAT-AM7053-C7671 – Mini Common Termination Contacts
- CAT-AM7053-H8172 – Mini Common Termination (CT) Housings
These contacts and housings are used to build harness receptacles that mate with the 1-292215-9 AMP Mini CT male pins, enabling wire-to-panel connections in the 1.5 mm Mini CT format. - Q9. How does the 1-292215-9 AMP Mini CT fit into TE Connectivity’s product categorization?
-
- A9. The 1-292215-9 AMP Mini CT is listed under TE Connectivity AMP Connectors as a Connector Assembly, specifically a plug to plug relay header, in the AMP Mini CT series. It falls within the PCB Connectors category, under Wire-to-Board Connectors, more specifically Wire-to-Board Connector Assemblies & Housings, and is part of the wire-to-panel connector system classification.
- Q10. What environmental and regulatory compliances are relevant to the 1-292215-9 AMP Mini CT?
-
- A10. TE Connectivity’s product compliance documentation associated with 1-292215-9 AMP Mini CT refers to:
- EU RoHS (Directive 2011/65/EU, RoHS2) limits on substances such as lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and cadmium, including applicable exemptions.
- EU ELV (Directive 2000/53/EC) limits for lead, hexavalent chromium, mercury, and cadmium, with exemptions.
- REACH regulation requirements, including reporting on Substances of Very High Concern (SVHC) based on ECHA guidance.
Specific and up-to-date compliance details for 1-292215-9 AMP Mini CT are available on the product page at TE.com. - Q11. Does the 1-292215-9 AMP Mini CT carry CE marking?
-
- A11. The documentation notes that finished electrical and electronic equipment will be CE marked as required by Directive 2011/65/EU. Individual components such as 1-292215-9 AMP Mini CT may not be CE marked themselves. Instead, they are evaluated within the context of the equipment into which they are integrated, with TE providing RoHS and related compliance information.
- Q12. In what kinds of applications can the 1-292215-9 AMP Mini CT be practically used?
-
- A12. The 1-292215-9 AMP Mini CT is suitable for any application requiring a panel-mounted, signal-level, 19-position, 1.5 mm pitch interface in the AMP Mini CT family. Typical uses include control panels, instrumentation backplanes, modular equipment interfaces, or any system where signals need to be relayed across a panel between internal boards or harnesses and external harnesses, using standardized Mini CT receptacles and contacts.
- Q13. How does the single-row layout of 1-292215-9 AMP Mini CT affect system design?
-
- A13. The single-row layout of the 1-292215-9 AMP Mini CT simplifies routing and labeling because each of the 19 positions can be arranged linearly along the panel edge or within a compact window. For PCB or harness routing, this can facilitate straightforward mapping of signals (e.g., channels 1–19) without multi-row pin mapping, which can be beneficial in compact panel designs or where clear signal sequencing is preferred.
- Q14. What is the significance of the 1.5 mm pitch in the 1-292215-9 AMP Mini CT?
-
- A14. The 1.5 mm pitch of the 1-292215-9 AMP Mini CT reflects the AMP Mini CT standard and allows a relatively high density of signal contacts in a small panel footprint. Compared with larger pitches (such as 2.54 mm), it enables more pins within the same width, allowing designs to group more signals into fewer connectors or reduce panel space dedicated to interconnects.
